Deals of the Best Central Vacuum Attachments 2018 Ultimate Buying Guide and Reviews

The 12 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance. The oversized pedal is easily operated with the foot to ease transitions from carpet to hard floor making the 37737 ideal for today s home with a mix of floor surfaces. Compatible with all canister vacuums, central vacuums, and commercial back pack vacuums using 1.25 accessories.

The brush is supported with a stamped steel back plate to insure uniform support for the brush when on hard floor surfaces and protecting the base of the tool from damaging sensitive surfaces. The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.

Perfect complement to any vacuum accessories kit. There is a 1.25 inch (32mm) end on this part – the 55871 should fit any wand with this size of connection. The vacuum nozzle with microfiber pad works wonders on dust and cleanup on hardwood floors. Compatible for use with all major brands of central vacuums, including: beam, electrolux, eureka, vacumaid, vacuflo, md, cyclovac, canavac, nutone, m&s, and imperium.

The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces. Ideal for area rugs and areas of the home where transitions from carpet to hard floor are typical. The second nozzle is a premium 12 USA produced hard floor brush with natural horsehair fill ideal for delicate floor surfaces. The lightweight highly flexible hose is made in the USA and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The wall end is designed to fit nutone and other inlets with a measured 1.50 diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle. An italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor.

The accessories include a 5 natural fill dusting tool, a 13 vented crevice tool, and 5 upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag. Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac, and imperium.

The wall end is an industry standard 1.50 on the outer diameter making it compatible with all major central vacuum inlets which have a 1.50 inlet with the exception of a nutone branded inlet which has a slightly smaller opening. The package features two chrome wands with nylon friction collars to help them stay in place without them wedging together so they can never be separated. A 12 natural fill floor brush and a combination nozzle which is ideal for area rugs door mats. A basic accessory set including a 10 crevice.4 dusting tool, and 5 upholstery. The mesh caddy bag allows you to collect and store the tools on the hose hanger with the hose in a bag that gives you visibility. Designed to provide a basic set of accessory tools for a central vacuum. The 91431 features a 1.25 x 30 foot non-electric hose produced using a unique process that provides a very smooth interior for superior airflow and quieter use.

The 91431 is compatible with all major brands of central vacuum including beam, eureka, vacuflo, vacu-maid, imperium, cyclovac, star power, canavac, hayden, air vac, md, and nutone systems not using the nutone branded square inlet. The 13 metal friction curved end is designed to swivel over the hose meaning less stress on you and the hose. Friction indicates that all tool to tool connections are made by the two parts wedging, pressing together without a physical locking mechanism. Industry standard wall valves and utility inlets on central vacuums that include this feature have the same inner diameter and will accept this hose end. The metal band will activate the low voltage control of your vacuum turning it on as it is inserted.

The lightweight highly flexible hose is made in the USA and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The wall end is designed to fit nutone and other inlets with a measured 1.50diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles. Compatible with all major brands of central vacuum systems equipped with standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use.

One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.

The 12 natural fill floor brush has a pivoting neck permitting it to move easily in and around tight spaces. The brush tapers to the end so it will fit into tight spaces for better detailing while vacuuming. A window cut in the front of the tool permits larger debris to enter the vacuum stream and be carried away rather than pushing it in front of the tool like a broom. Designed for general use with most north american brands of domestic, commercial, home shop, and central vacuums equipped for use of industry standard 1.25 accessories. Two 1.25 italian made chrome steel wands feature a unique nylon collar system to keep them securely together while permitting easy separation with a simple twist when not in use. The wands are designed to be compatible with north american standard 1.25 canister, upright, home shop, and central vacuums. The set is ideal for providing a solution for hard floor cleaning of surfaces using the on board vacuum hose of your upright vacuum or those seeking full size tools to complement your canister vacuum.

The 10 crevice tool with notched end insures continuous airflow, and the 4 dusting tool also has natural fill for safe cleaning of home furnishings. The 5 upholstery tool can be sued separately to raise matted carpet or be equipped with a slide on natural fill brush great for grooming upholstered surfaces in the home, car, or recreational vehicle.

Compatible with all major brands of central vacuums including beam, electrolux, eureka, vacumaid, vacuflo, nutone, cyclovac, canavac, husky, star power, md, and imperium. Premium american made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning. 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle. Central vacuum package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the nozzle from the hose handle.

The 14wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.

No questions asked return policy. Green label is a premium and environmentally friendly manufacturer of aftermarket vacuum and steam mop filters and accessories. Fits 1 1/4 inches friction-fit wands. Please note: does not fit clip-type wands (like dyson, shark, etc. Fits all vacuums that accept standard 1 1/4 inch inside diameter attachments (hoover, dirt devil, bissell, miele, samsung, electrolux, kenmore, panasonic, siemens, kirby, rainbow), fits most central vacuum systems. Natural horsehair bristles, considered the best material for vacuum cleaner tools. Removable soft rubber wheels to assure correct height, ease of use and to prevent scratching.

14 inches wide, covers larger surface. Package contains: 1 x deluxe floor brush.

Compatible with all major central vacuum brands including, beam, electrolux, eureka, vacuole, vacuumed, mad, prolix, cyclonal, canavan, honeywell, and imperium. The hose features a smooth interior for superior airflow and the soft grey color assure the hose to be non-marking. Features a commercial grade 1.25 x 35 foot vacuum hose with the trademarked arc relax strain relief to increase hose life by preventing kinking. Includes a white hose hanger with a unique non-slip blade to keep the hose on the hanger. Includes a premium grey rug and hard floor combination tool with wheels to insure easy movement on carpeted surfaces and area rugs.